BMW R 1200 GS 2005, Руководство пользователя для мотоциклиста

Страница: 61 / 157

With OE BMW Motorrad In-
tegral ABS:
If you switch on the ig-
nition while the brakes
are applied, then start the
engine and ride off immedi-
ately, the BMW Integral ABS
remains in residual braking
function mode. Self-diagnosis
is performed as soon as the
brake levers are in their fully
released positions for the first
time. Until this completes the
ABS function is not available;
the same applies to power
assistance for the brakes.
When you start the engine,
wait for the ABS to complete
its self-diagnosis.
Switch on the ignition.
Pre-ride check is
performed. (
59)
ABS self-diagnosis is per-
formed. (
60)
Press starter button 1 .
If ambient temperatures
are very low, you might
find it necessary to open the
throttle slightly when starting
the engine. At ambient tem-
peratures below 0 °C, disen-
gage the clutch after switch-
ing on the ignition.
The start attempt is
automatically interrupted
if battery voltage is too low.
Recharge the battery before
you start the engine, or use
jump leads and a donor
battery to start.
The engine starts.
Consult the troubleshooting
chart below if the engine
refuses to start. (
122)
Pre-ride check
The instrument cluster runs a
pre-ride check of the 'Gener-
al' warning light and some of
the warning indicators when
the ignition is switched on.
The warning light shows first
red and then yellow, so that
you can check that it is in
working order. The test is
aborted if you start the engine
before it completes.
Phase 1
General warning light
lights up red.
Battery charge current
symbol appears on the
display, accompanied by the
engine oil pressure symbol.
5
59
z Riding