BMW 525I SEDAN, Руководство пользователя

Страница: 98 / 223

Practical interior accessories
96
The equipment can be used in ignition key
position 2.
If the device can not be operated
after repeated programming, check
whether the original hand-held transmitter
uses an alternating-code system. Here,
either read the instructions for the original
hand-held transmitter or hold down the
programmed memory button
1 of the inte-
grated universal remote control. If the indi-
cator lamp
2 on the integrated universal
remote control flashes rapidly for a short
time then lights up for approx. 2 seconds,
this indicates that the original hand-held
transmitter uses an alternating-code sys-
tem. In the case of an alternating-code sys-
tem, program the memory buttons
1 as
described at Alternating-code transmit-
ters.
<
Alternating-code transmitters
To program the integrated universal remote
control, consult the operating instructions
for the equipment to be set. You will find
information there on the possibilities for
synchronization.
When programming hand-held transmitters
that employ an alternating code, please
observe the following supplementary
instructions:
Programming will be easier with the
aid of a second person.
<
1. Park your vehicle within the range of the
remote-controlled device
2. Program the integrated universal
remote control as described above at
Fixed-code hand-held transmitters
3. Locate the button at the receiver of the
equipment to be set, e. g. on the drive
4. Press the key on the receiver of the
device you want to set up. After step 4,
you have approx. 30 seconds for step 5
5. Press the programmed memory but-
ton
1 of the integrated universal remote
control three times.
The corresponding memory button 1 is now
programmed with the signal of the original
hand-held transmitter.
If you have any additional questions,
please contact your BMW center.
<
Clearing memory buttons
Press both outer buttons 1 of the inte-
grated universal remote control for approx.
20 seconds until the indicator lamp
2
flashes. All memory buttons will be cleared.
The memory of individual memory but-
tons
1 cannot be cleared.
Roller sun blinds *
Rear window blind
To actuate as of ignition key position 1,
briefly press the button in the driver's door.
Roller sun blinds for rear side
windows
Pull the roller sun blind at the loop and
hook up to the bracket.
Online Edition for Part No. 01 41 0 158 159 - © 02/04 BMW AG