BMW Motorrad R 1250 R Скачать руководство пользователя страница 79

Страница: 79 / 300

in the country in which the

vehicle is used.

Start the engine (

135).

Press button

to switch on

the additional headlight.

The indicator light for the

additional headlight illu-

minates.

Press button

again to

switch off the additional

headlight.

DAYTIME RIDING LIGHT

with daytime riding light

Manual daytime riding light

Requirement

Automatic daytime riding light

is switched off.

WARNING

Switching on the daytime

riding light in the dark.

Risk of accident

Do not use the daytime rid-

ing light in the dark.

By comparison with the

low-beam headlight, the

daytime running light makes

the vehicle more visible to on-

coming traffic. This improves

daytime visibility.

Start the engine (

135).

Navigate to

Settings

Vehicle settings

Lights

and switch off the

Auto. daytime light

function.

Press button

to switch on

the daytime riding light.

The indicator light for the

daytime riding light lights

up.

The low-beam headlight

and the front side lights are

switched off.

In the dark or in tunnels:

Press button

again to

switch off the daytime riding

light and switch on the low-

beam headlight and front side

light.

Содержание R 1250 R













































































































































































































































































































Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды

BMW Motorrad R 1250 R, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды