BMW Motorrad R 1250 R Скачать руководство пользователя страница 59

Страница: 59 / 300

ABS Pro failed

with riding modes Pro

lights up.

ABS Pro failure! On-
ward journey pos-

sible. Ride carefully
to next specialist work-
shop.

Possible cause:

Monitoring of the ABS Pro

function has detected a fault.

The ABS Pro function is not

available. The ABS function is

still available. ABS provides

support only for braking in

straight-ahead driving.

You can continue to ride.

Bear in mind the more

detailed information on

certain situations that can

lead to an ABS Pro fault

message (

156).

Have the fault rectified as

quickly as possible by a spe-

cialist workshop, preferably an

authorised BMW Motorrad re-

tailer.

ASC/DTC intervention

quick-flashes.

The ASC/DTC has detected a

degree of instability at the rear

wheel and has intervened to

reduce torque. The indicator

and warning light flashes for

longer than ASC/DTC interven-

tion lasts. This affords the rider

visual feedback on control in-

tervention even after the critical

situation has been dealt with.

ASC/DTC self-diagnosis not

completed

slow-flashes.

Possible cause:

ASC/DTC self-diagnosis

not completed

The ASC/DTC function is

not available, because self-

diagnosis did not complete.

(The motorcycle has to reach

a defined minimum speed

with the engine running for

the wheel-speed sensors to

be checked: min 5 km/h)

Pull away slowly. The ASC/

DTC indicator and warning

light must go out after a few

metres.

If the ASC/DTC indicator and

warning light continues flash-

ing:

Seek the advice of a special-

ist workshop, preferably an

authorised BMW Motorrad

dealer.

Содержание R 1250 R













































































































































































































































































































Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды

BMW Motorrad R 1250 R, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды