BMW Motorrad R 1250 R Скачать руководство пользователя страница 103

Страница: 103 / 300

On some mobile devices,

e.g. those with iOS

operating systems, the

BMW Motorrad Connected App

must be opened before use.

Currency

The TFT display may be up-

dated after the publication

date. Because of this, your

motorcycle may differ from

the information supplied in

the Rider's Manual. Up-to-

date information is available at:

bmw-motorrad.com/service

PRINCIPLE

Controls

All display content is controlled

by means of Multi-Controller

and MENU rocker button

Depending on the context, the

following functions are pos-

sible.

Multi-Controller functions

Turn the Multi-Controller up:

Move the cursor up in lists.

Adjust settings.

Increase volume.

Turn the Multi-Controller

down:

Move the cursor down in lists.

Adjust settings.

Decrease volume.

Tilt the Multi-Controller to the

left:

Activate the function in ac-

cordance with the operation

feedback.

Activate the function to the

left or back.

Go back to the Menu view

after making the settings.

In Menu view: Change up one

level.

In the My Vehicle menu: ad-

vance one menu screen.

Tilt the Multi-Controller to the

right:

Activate the function in ac-

cordance with the operation

feedback.

Confirm selection.

Confirm settings.

Advance a menu step.

Scroll to the right in lists.

In the My Vehicle menu: ad-

vance one menu screen.

Содержание R 1250 R













































































































































































































































































































Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды

BMW Motorrad R 1250 R, Руководство пользователя для мотоциклиста

Результаты поиска

Содержание R 1250 R

Отзывы:

Бренды по названию

Популярные бренды