BMW Motorrad R 1200 RT 2005, Руководство пользователя для мотоциклиста

Страница: 124 / 171

A short-circuit can result
if the crocodile clips of
the jump leads are acciden-
tally brought into contact with
the motorcycle.
Use only jump leads fitted
with fully insulated crocodile
clips at both ends.
Jump-starting with a
donor-battery voltage
higher than 12 V can damage
the motorcycle electronics.
The battery of the donor ve-
hicle must have a voltage of
12 V.
Make sure the ground is
level and firm and park the
motorcycle.
Removing passenger seat
(
57)
Removing driver's seat
(
57)
When jump-starting the en-
gine, do not disconnect the
battery from the onboard
electrical system.
Remove the protective cap
from the positive battery ter-
minal.
Run the engine of the donor
vehicle during jump-starting.
Begin by connecting one
end of the red jump lead
to the positive terminal of
the discharged battery and
the other end to the pos-
itive terminal of the donor
battery.
Then connect one end of
black jumper lead to nega-
tive terminal of donor bat-
tery, and other end to neg-
ative terminal of discharged
battery.
Start engine of motorcycle
with discharged battery in
usual way; if engine refuses
to start, wait a few minutes
before repeating attempt to protect starter and donor
battery.
Allow both engines to idle
for a few minutes before
disconnecting the jump
leads.
Disconnect jumper lead
from negative terminal first,
then from positive cable.
To start the engine, do
not use start sprays or
similar items.
Installing driver's seat
(
58)
Installing passenger seat
(
59)
Battery
Maintenance instructions
Correct upkeep, recharging
and storage will prolong the
life of the battery and are es-
sential if warranty claims are
to be considered.
7
122
z Maintenance