BMPRO BatteryPlus35HA, Системное руководство

Страница: 37 / 60

37
Description of Buttons
Water Pump Button
This button controls power to the water pump outputs on
BatteryPlus35
.
When
BatteryPlus35
and
Trek
are first powered, the outputs assigned for the pumps
are ON and
Trek
display “ON PUMP1” and “ON PUMP2”
Pump 1 To switch pump 1 On/Off press the water pump button once
Pump 2 To switch pump 2 On/Off press and hold pump button until the
desired change is seen.
In setup mode the water pump button turns into the “ button”.
Backlight Button
Backlight button is primarily used to enable the backlight.
In setup mode the backlight button is the “ button”
Backlight Functionality
Turn on backlight temporarily
: Press any button to turn ON the backlight
temporarily and will automatically turn off after 30 seconds.
Turn on nightlight:
Press and hold the backlight button until the backlight blinks
(approximately three seconds). The backlight will turn ON for 10 hours.
Turn off nightlight: Press and hold the backlight button until the backlight is OFF
Home Button
Pressing and holding the Home button for approximately 3 second puts
Trek
into the
setup mode.
In setup mode the home button is the “back button”.
Battery Button
The battery button is used to disconnect the battery, AC mains, auxiliary and solar
sources from the loads. Pushing the battery button will toggle the loads ON and OFF.
When Trek is first turned on the battery will power the loads and “BATTERY OFF”
is NOT displayed. When the battery button is pressed, the loads are disconnected
from the battery and “BATTERY OFF” will appear and all other segments will also be
turned off to reduce current draw from the battery.
In setup mode the battery button is the “EDIT button”.
8
8
9
10
11
13
8
2 3