BMPRO BatteryPlus35HA, Системное руководство

Страница: 19 / 60

19
BATTERIES
Note: This battery charger is rated to charge battery banks of up to 600 Ah capacity.
When using batteries with this product, always consult with the battery manufacturer
for a detailed description of the installation, use and maintenance of the battery.
The chemistry that the product can charge is detailed below:
BatteryPlus35
SR HA PM
Battery Chemistry Lead-Acid Only
Lead-Acid
LiFePO4
Lead-Acid Only
Table 2:
Product name and their corresponding chemistry
A
BatteryPlus35HA
can be used to charge a LiFePO4 battery but will need to be
set using a
Trek
before use. At default the
BatteryPlus35HA
is set to Lead-Acid
chemistry.
The battery will charge faster when all loads in the caravan are small.
Note: Lead-acid battery may be Gel, AGM, Sealed, Wet or Lead crystal. Consult the
battery manufacturer for profile and maximum voltage and set this using the
Trek
.
Paralleling Batteries
When paralleling batteries together, all batteries MUST be
• of the same type and chemistry, e.g. deep cycle battery
• of the same capacity, e.g. 100 Ah
• of the same manufacturer
• fully charged before connecting them together
Figure 5 is a recommendation, an auto-electrician may wire this based on system
requirements.
Figure 5:
Recommended wiring for
connecting batteries in parallel.