BMI IDP1010, Руководство пользователя

Страница: 5 / 29

4
Health Warning
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contain chemicals
known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks, cement and other
masonry products, and
• Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemicals: Work in a well ventilated area, and
work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic
particles.
Unpacking
Open the container and carefully lift the saw by the foam packag-
ing and place it on a flat, level working area. Be sure that you
have the following items before you discard the container:
• Saw
• Plastic water tray
• Rear drip tray
• 10” saw blade
• Universal wrench
• Water pump
• Rip guide
• Owner’s manual
• Drain plug
See also page 23 for additional optional accessories.
Set Up
Proceed to the following section to complete the assembly
of the saw:
1. Slide water pump onto U-shaped bracket located at the
bottom of the frame. (see figure 1)
2. Slide cutting head onto the post. Secure cutting head
to the shaft using the provided flat washer, lock washer
and nut. Then attach cutting depth control knob and
washer to the cutting head through the slot located un-
derneath the belt guard.
3. Mount blade guard onto shaft protruding from the side
of the cutting head. Secure the blade guard in place
using the provided serrated washer and blade guard
knob.
4. Attach rear drip tray to the water tray.
figure 1