G2S BPAP Series User Manual V2.1
12 / 43
• Do not stack the long tubing or SpO
2
Kit lead near the patient’s neck, as it may wrap around
the patient’s head or neck during sleep.
• Do not connect any equipment to the device unless recommended by BMC or your health
care provider.
• Please contact BMC to obtain an SD card if needed.
10. System Features
Fig. 10-1
Name
Function
Humidifier
Indicator
Indicate the humidity level. There are five levels in total. The
number of indicator lights that light up is directly proportional to the
humidity level. If the indicator lights are off, it means the humidifier
is turned off
Mute Button
Press this button to mute the alert. However, if the problem causing
the alert is not solved, the alert will sound again two minutes later
Knob
Start treatment and adjust device settings
Ramp Button
Enable the Ramp feature
Display Screen
Display menus for operation, messages, monitoring data, etc.
Power Indicator
Indicate the power supply status
Fig. 10-2
Name
Function
SD Card Slot
Insert the SD card into this slot
Air Outlet
Deliver pressurized air; connects to the tube
Communications
Port
Connected to external equipment (Not for connection to
un-recommended devices)
DC Inlet
An inlet for the DC power supply
Filter Cap
(Air Inlet)
Place the cap on the air filter, which is used to filter dust and pollen
in the air entering the device
