G2S BPAP Series User Manual V2.1
32 / 43
SD Card Full!
Low
Priority
Alarm
The screen will display “
SD Card Full!
”
if the SD card has reached its maximum
capacity.
Reinsert SD card!
Low
Priority
Alarm
The screen will display “
Reinsert SD
card!
” if the SD card fails to work.
Note: the delay time of alarming system of this device is no more than 1 s.
15.6 Reposition of Alarming
After the elimination of the alarming faults, the residual alarming information still exists
(alarming information is shown on the top of the screen without any visual and auditory
alarming), and turn the button
leftwards or rightwards to reduce the residual alarming
information.
15.7 Alarming Journal
The alarming journal is designed for the breathing machine to record the latest 6 alarming
information. Reserved inside the machine, the alarming journal will not be lost after the
power supply interruption and the latest alarming will replace the former one with 6
reserved.
WARNINGS!
• Prior to the use of equipment, the oeprators should examine the current alarming
pre-arrangement to check if it is applicable to each case of patient, and such
pre-arrangement can only be changed by the professional doctors and must not be modified
by the patients at home.
• In the case of the suspension of the power or the power loss for no more than 30 seconds,
it will restore the last set alarming value on the next oepration.
16. Cleaning and Disinfection
WARNINGS!
• Regular cleaning of the device and its accessories is very important for the prevention of
respiratory infections.
• To avoid electric shock, always unplug the device before cleaning.
• Use mild soap that is nontoxic to humans.
• Follow the manufacturer's instructions on cleaning the mask and tube and on determining
the frequency of cleaning.
• Before cleaning, check whether the device has been disconnected from the power supply,
whether the power cord has been unplugged, and whether the water chamber of the
humidifier has cooled down. Make sure the heater plate has cooled down to room
temperature, so you do not get burned.
• Do not open or modify the device. There are no user serviceable parts inside. Repairs and
servicing should only be performed by an authorized service agent.
