blupura WAVE HOT, Руководство по эксплуатации и обслуживанию

Страница: 23 / 36

23
Fig. 23.1 - Mod. Wave Hot
Turning on the boiler
The boiler can be turned off by a mechanical
switch-type push button (1).
Never turn on the boiler unless you have
filled the machine with water.
Never turn on the boiler when the inlet
water is disconnected.
Connect inlet water bulkhead to the water
main and the outlet to the dispensing tap.
Connect the boiler condensation drain pipe
to a drain line or insert it into a collecting bin.
Hold down P.3 button first and then hold
down P.4 button at the same time (mod.
Wave Hot) or the hot water dispensing button
on your chosen tap to release any air in the
circuit and make sure that the boiler is full with
water.
Turn on the boiler switch and make sure
the front panel is closed. After around
1-2 minutes, the water reaches the setted
temperature.
Boiler Thermostat
The thermostat (2) is set in the maximum
position to control the boiler.
If you want to decrease the temperature of
the hot outlet water, turn the thermostat screw
anti-clockwise.
1
2
CAUTION!
Hot water reaches 95°C. Keep children
away. Hot, boiling water and steam will
scald if spilled on skin.
Do not touch the dispensing nozzle to
avoid burns.
To ensure proper operation and avoid
damage to the installation, proceed to a
periodic decalcification of the machine. It
is recommended to decalcify the machine
every 3 months with a specific product
suitable for plastic materials and light
alloys and rinse thoroughly.
Fig. 23.2 - Mod. Wave Box Hot 60
2