blupura WAVE HOT, Руководство по эксплуатации и обслуживанию

Страница: 22 / 36

22
Fig. 22.1 - Mod. Wave Hot
Fig. 22.3
Electrical connection
The connections must comply with local
regulations. The grounding of the unit is
a legal requirement.
Make sure that the main switch (1) and
the boiler switch (1, Fig. 25.1 and 25.2)
are turned off.
Connect the power cord to the IEC inlet
and to a socket.
Turn the unit on by selecting the “I”
position on the main on/off rocker switch
(1). The compressor and fan are now
activated.
Press the “Sparkling Water” button on
the right of the Wave Hot keypad (4) or
on your chosen tap in order to release
any air in the circuit and to allow the
pump to fill the carbonator with water.
After around 1-2 minutes, the sparkling
water pump stops.
Chiller Thermostat
The thermostat (2) is set in the maximum
position to control the ice bank.
If you want to avoid the formation of ice
in the bank, turn the thermostat screw at
least 1/4” anti-clockwise.
In the case of freezing of the water
circuit, turn off the unit and keep it off for
at least12 hours.
2 1
4
Fig. 22.2 - Mod. Wave Box Hot 60
1
2