blupura WAVE HOT, Руководство по эксплуатации и обслуживанию

Страница: 21 / 36

21
Fig. 21.1 - Mod. Wave Hot
1
2
3
Connection to the mains wa-
ter supply
Check that the mains pressure is between 1
bar and 3,5 bar. To enhance the quality of the
sparkling water dispensed, an incoming flow
rate in excess of 3.5 l/min is recommended.
Use a food grade pipe (external diameter
5/16” = 8 mm) to connect the water supply
entry (1) to the mains water supply, preferably
with a wall tap.
Connect the boiler condensation drain pipe
(5) to a drain line or insert it into a collecting
bin.
In Mod. Box Hot, connect the outlet pipes to
the joints (4) and to the chosen dispensing
tap for the installation. Insulate the tubes
connecting the Box and the tap for all of their
length in order to maintain the water inside
fresh.
The machine comes with a non-return valve
(2) and a security valve (3). It’s not included
a water pressure reducer, that must be
assembled upstream the system.
Once the pipes are attached, turn on the tap.
Ensure there are no leaks.
Before drinking the water from the system,
perform a thorough rinse of the circuit by
dispensing water from each product line.
CAUTION!
To connect the water cooler to the
mains water supply, you will need to
use a new set of connectors (joints,
gaskets and pipes).
Do not use a set of connectors that has
already been used elsewhere.
The water pressure entering the unit
must be between a minimum of 1,0
bar (0,10 MPa) and a maximum of 3,5
bar (0,35 MPa).
In Box models, for a proper installation
of the system, the use of the Water Block
is compulsory (cod. 140065).
4
Fig. 21.2 - Mod Wave Box Hot
1
5