blupura ECOCHIC 150 IT, Руководство по эксплуатации и обслуживанию

Страница: 28 / 36

28
Fig. 28.1
Fig. 28.2
Fig. 28.3
Replacement of the UV lamps
The replacement can only be performed
by qualified personnel.
Disconnect the unit from its electrical
source.
Once the unit is shut down, open the top
cover following the instructions of page
23 and unscrew the valves from their
dedicated slots (2). Loosen the fixing screw
of each dispensing nozzle (1) and remove
it.
Disconnect the electrical connector of
the UV OUT lamp (3). Pull the lamp (4)
removing it from its fitting holder—handling
it carefully.
Insert the new lamp and reconnect the
connector — handling it carefully.
Repeat the procedure for all the
dispensing valves.
N.B. For the replacement of UV OUT pipe
it’s not necessary to turn the water off.
The light emitted by the ultra-violet
lamp may cause serious burns to the
eyes and skin.
Do not remove it from its stainless-steel
container – only a qualified technician
should do so.
3
Disposal of used UV OUT lamps
The UV lamps contain mercury amalgam. This allows the disposal of the lamps
at a local waste management site. This way of disposing is completely identical
to the disposal of neon lamps or energy-savings lamps. These lamps are
nevertheless registered under the same conditions as the disinfection lamps.
2
1
4