ENGLISH
ENGLISH
9
10
7
8
1
2
3
When the cooker reach working pressure, the pressure indicator will light up,
entering the pressure keeping process. The nixie tube will begin the count down-
time of the pressure keeping duration. When it reaches "0", the food will be fully
cooked. The cooker will alarm the use before enter the "keep warm" state
automatically. The nixie tube will now display how long the cooker has been
warming the food for.
NOTE:
a
- When the temperature of inner pot is too high, the indicator of “Keep Warm” will
flash. When the temperature returns to normal, the indicator of “Keep Warm” will
remain lit.
b
- In warm keeping state, pull off the power cord if you don’t need enter standby
mode. For safety, after warm keeping for 12 hours, the cooker will enter standby
mode if there is no operation.
Open the lid and take out the food (Safety open)
Set the pressure release valve to “Exhaust” position to exhaust the air, until the
floater drops. (See picture 9)
In standby mode, you can choose the corresponding cooking function as per
your cooking need. For example, if you want to cook rice, you should press the
function button of “RICE” after finishing the cooking preparation. The following
table shows the default pressure maintaining time of functions.
After the function is selected, the electrical pressure cooker automatically gets
into the cooking state after 5 seconds if there is no operation.
After finishing cooking, the electrical pressure cooker sounds a warning tone and
gets into the heat preserving state, wherein its heat preserving light is normally
on.
NOTE:
a
- If cooking liquid food (soup, porridge, etc), when the warm keeping indicator is
on, do not exhaust the air immediately, Have to wait naturally cooling until the
floater drops, or else the liquid food will spout though exhaust pipe. Putting a wet
tower on the lid will speed up cooling.
b
- Pull off the plug before opening the lid.
OPERATION GUIDE
1
PRESSURE COOKER SETTING
2
GENERAL COOKING FUNCTIONS
PRESSURE COOKER SETTING
1. First-time Use
If this is the first time for you to using this product, remove any parts or accessories
that are stored inside the cooker body after you have remove the product from the
box.
Please carefully read the User Manual, in particular, the Safety Precautions before
using this product.
2. Normal Use
Check whether the electrical pressure cooker is opened and closed without
a
hitch.
Confirm that the float valve and vent valve of pot cover is not blocked and the
seal ring and anti-blocking cover are installed well.
Put the food and water in the inner pot.
Wipe the inner pot dry and put it in the cooker body.
Close the electrical pressure cooker in place.
Place the vent valve well at Sealed position.
