BlueSky Mast AL1 STANDARD Series, Руководство пользователя, Страница: 57 / 76

Lift Handle Instructions
support@blueskymast.com
877-411-6278
Page
57
LIFT HANDLE DEPLOYMENT INSTRUCTIONS
A. Get another mast pole out of the pole bag insert the silver end into the bottom the mast pole
already locked in the cam lock. Make sure that the castle cut on both poles nest firmly together
and no silver is visible in the seams of the joint.
B. Holding the bottom mast pole firmly with one hand, slowly release the cam lock and allow the
pole to slide down and rest firmly on the ground.
C. Locate the male lift handle and place it at the bottom of mast pole on the ground 5 inches from
the bottom. Do not use the bottom 5 inches of the mast pole.
D. Interlock the female lift handle with the male lift handle and lift the mast pole up.
E. Engage the Cam Lock on the tripod and release the mast pole slowly to make sure that it does
not slide down in the tripod. If it does begin to slide down, check that the cam lock is engaged
fully or make adjustments as needed.
F. Repeat this process for the remaining mast poles or until desired height is reached.
A
B
C
D D
E
MALE FEMALE
INTERLOCKED