BlueSky Mast AL1 STANDARD Series, Руководство пользователя

Страница: 52 / 76

www.BlueSkyMast.com
877-411-6278
Page
52
AL1 / AL2 Standard Series User Manual
Primary and Secondary Guying (2 - 15 Meters)
23. Level the Mast and Adjust the Base Pole
A. Make sure that the tripod is level and that the base plate on the base pole is centered be-
low the mast.
B. Secure the base pole in the tripod by gripping the knurled section of the top of the tripod
with one hand and while applying slightly downward force, use the other hand to lock the
Cam Lock.
C. Re-level the tripod by simply tapping or nudging the base pole with your foot in the cor-
rect direction until the bubble levels on the tripod read correctly.
24. Stake the Base Pole
A. Using the tripod stakes, drive a stake through two of the four holes on the base pole base
plate.
B. Make sure the steel head of the tripod stake contacts the base plate. Once the Head has
firmly contacted the base plate, stop hammering. (Continued hammering may damage
the base plate.)
C. If the ground is too hard to hammer the stake deep enough for the head to contact the
base plate, then drive the stake into the ground at an angle towards the center to maxim-
ize the surface area contact of the stake so that the base plate is secure.
24.A
25. Final Step - Staking, Adjusting and Locking the Secondary Guy Ropes
A. Locate the 4 galvanized steel guy takes in the staking kit bag.
B. Confirm all 4 Secondary Guys are evenly placed at a 45 degree angle between the
Primary Guy Ropes.
C. Pull each of the Secondary Guy Ropes out to its fullest distance and drive a guy stake into
the ground. Attach, adjust and lock the guy rope into position.
25.C
25.C