BlueSky Mast AL1 STANDARD Series, Руководство пользователя

Страница: 48 / 76

www.BlueSkyMast.com
877-411-6278
Page
48
AL1 / AL2 Standard Series User Manual
Primary and Secondary Guying (2 - 15 Meters)
15. Raise the Rest of the Mast Poles
A. Get another mast pole out of the pole bag insert the silver end into the bottom the mast
pole already locked in the cam lock. Make sure that the castle cut on both poles nest firm-
ly together and no silver is visible in the seams of the joint.
B. Holding the bottom mast pole firmly with one hand, release the cam lock and allow the
weight to settle onto the hand holding the just-added mast pole.
C. Using both hands, slide the mast pole up through the tripod until only until there is only
about 4 inches of the bottom of the mast pole visible below the tripod.
D. Lock the cam lock on the tripod.
E. Repeat this process for the remaining mast poles or until desired height is reached.
15.A
15.D 15.C 15.B
4”
Warning: If at point the mast begins to slip while the cam lock is locked - STOP!!
Use the 7/16 wrench provided with the system and tighten the nut on the cam lock
1/4 turn until slipping no longer occurs.
Helpful Hint: Lift Handles are available as an optional accessory and can be used to more easily
raise the mast poles. Lift Handles (BSM2-P-Y702-GRP-000)