Page
24
of
25
The Blueprint Laboratory Confidential Proprietary Information not to be reproduced or made available to third parties without prior
consent from The Blueprint Laboratory and not to be used in any unauthorised way. © The Blueprint Laboratory Pty Ltd 2021
10. Line up bayonet teeth with
female. Ensure the Red dots are
offset by 45 degrees and not their
direction. Insert male module into
female. Ensure grease is applied
to both surfaces.
11. Rotate module to 45 degrees
to align the red dots. Pull apart to
feel teeth engage.
12. Tighten looking nut.
13. Tighten Grubscrew.
