Page
15
of
25
The Blueprint Laboratory Confidential Proprietary Information not to be reproduced or made available to third parties without prior
consent from The Blueprint Laboratory and not to be used in any unauthorised way. © The Blueprint Laboratory Pty Ltd 2021
Electrical
The standard connector interface for RS1 range is a 5-PIN HUMG SeaConn Connector. The mating connector is
a 5 Pin HUMG CCP. It is important that the serial device and the RS1 Actuator share a common ground. Failing
to do so could damage the device.
Figure 3: 5 Pin HUMG SeaConn Connector RS232 - Male Face View
When using a RS485 version Pin 4 is A and Pin5 is B.
