ETX-CN700
Installation
Page | 13
Figure 2: ensure mounting pillars are fitted to host board
The next action is to carefully align the connectors of the ETX CN700 with those on the host board and
carefully press together.
Note: The Hirose connectors are offset from each other, so the ETX CN700 will only fit on one orientation.
Trying to force the ETX CN700 in the wrong orientation may damage the connectors
Figure 3: Align ETX CN700 connectors with the host board
If the memory module is not already fitted, then carefully fit the memory module onto the memory socket. The
socket is notched to indicate the orientation of the module
At this stage, the cooling solution should be applied. There are several different methods of cooling the ETX
CN700
