16
We reserve the right to make changes without any prior notice.
Translation from original instructions
Pallet trucks or forklift trucks with short forks can be used (e.g. piano lifts) for handling inside buildings.
The unit should be lifted as little as possible when handling in order to avoid overturning risks.
If forklift trucks with short forks are used, position some protective material between the unit and the forklift trucks and the
clamping belts.
Fig. 2 Pallet trucks and forklift trucks with short forks
At least two people must be present while the unit is being handled with forklift trucks with short forks.
Before sliding out the pallet, remove the screws fixing it to the unit. Use a 13 mm spanner to unscrew them.
The screws which fix the pallet to the unit are located in correspondence with the holes on the pallet’s bottom axis.
Fig. 3 Position of fixing screws
To remove the fork lift trucks:
- lowering the forklift trucks as much as possible;
- remove the belts securing the trucks to the unit;
- Use a crowbar or a similar device to lift the unit enough to allow the removal of the trucks from each side;
-
Remove the protective devices from the unit.
Fig. 4 Sequence of operations to remove the pallet
