Blue Seal G91, Инструкция по установке и эксплуатации

Страница: 22 / 24

20
Gas Conversion and Specifications
Gas Specifications
- All Other Countries:
(*) NOTE:

(*) Measure burner operating pressure at manifold test point with both burners operating at
'High Flame' setting.

NAT, LPG & Butane Only - Operating pressure is ex-factory set and is not to be adjusted,
apart from when converting between gasses, if required.

(**) TOWN GAS Only - Burner operating pressure is to be adjusted using Town Gas
adjustable gas regulator supplied.

Refer to ‘Gas Conversion and Specifications’ section of this manual for further details.
Natural Gas Town Gas (**)
Main Burner Injectors Ø 1.85mm Ø 3.50mm
Low Fire:
Size Ø 1.00mm Ø 1.00mm
Adjustment 2 turns out (ccw) 4 turns out (ccw)
Supply Pressure 1.13 - 3.40 kPa 0.76 - 1.50 kPa
Burner Operating Pressure (*) 1.00 kPa 0.63 kPa
Gas Regulator Cap Screw
Adjustable Regulator
(Adjust to the Burner
Operating Pressure)
LP Gas (Propane) Butane
Main Burner Injectors Ø 1.15mm Ø 1.10mm
Low Fire:
Size Ø 1.00mm Ø 1.00mm
Adjustment ½ turn out (ccw) ½ turn out (ccw)
Supply Pressure 2.75 - 4.50 kPa 2.75 - 4.50 kPa
Burner Operating Pressure (*) 2.55 kPa 2.55 kPa
Gas Regulator Cap Screw