Blue Coat ProxySG SG900-10, Руководство по обслуживанию и модернизации

Страница: 68 / 104

68 ProxySG 900 Series Maintenance & Upgrade Guide
LAN Option Card
Option Card Listing
The table below lists the available option cards for the ProxySG 900 Series appliance. The
appliance uses a PCI riser card assembly to accomodate installation of two option cards. The
long option card is installed in expansion slot 2 (the left-most expansion slot when looking
from the rear). The short option card can be installed into expansion slot 1 (the right-most
expansion slot when looking from the rear) or expansion slot 2.
!
Caution: Do not install any NIC (network interface cards) which are not explicitly
supported by the ProxySG 900 appliance. Installation and use of unauthorized NICs might
damage the appliance and will invalidate your warranty!
Next:
• If you are installing a full-length option card into your appliance, see
“Installing a Long
Option Card” on page 73
.
• If you are installing a half-length option card into your appliance, see
“Installing a Short
Option Card” on page 76
or
“Installing a Long Option Card” on page
73
, depending on which slot you wish to install the half-length card.
Network Card Description Expansion Slot Usage
NIC-900-4xGigE-PT 4-Port Copper Gigabit Ethernet PCI Express
Bypass Server Adapter Expansion slot 1 (short)
or
Expansion slot 2 (long)
NIC-900-4xGigE-PT-Fiber 4-Port Fiber (SX) Gigabit Ethernet PCI Express
Bypass Server Adapter Expansion slot 2 (long)
NIC-SG900-10G-PT-Fiber 2-Port Fiber 10GBASE SR Ethernet PCI Express
Bypass Server Adapter Expansion slot 2 (long) using the
included full-size bracket, see
“Replacing the 10G 2-
port Option Card
Bracket” on page 69