background image

INSTRUCTIONS FOR THE USE OF THE BRUSHCUTTER

              

 

 

GB-2 

 

1.0 SAFETY 

RULES 

1.1 Introduction 

ALL THE MACHINES AND EQUIPMENTS ARE UNDER CONSTANT DEVELOPMENT 
AND WE RESERVE THE RIGHT TO MODIFY THE RESPECTIVE TECHNICAL DATA, 
WEIGHTS, CONSTRUCTION AND STANDARD EQUIPMENT PROVIDED IN ANY 
MOMENT WITHOUT NOTICE. THE INFORMATION AND ILLUSTRATIONS CONTAINED 
IN THIS MANUAL ARE PURELY INDICATIVE AND NOT LEGALLY. 

1.2 Appropriate 

use 

The brushcutter must be used exclusively to cut grass, shrubs and bushes. Any use of the 
equipment other than those specified in this manual may create serious risk of injury or 
damage. 

1.3 General 

instructions 

 

Carefully read and comprehend all the instructions and recommendations provided in this manual before beginning 
to work. This manual must be constantly maintained in good condition for immediate consultation whenever 
necessary. 

 

 

The machine must be used only by adults who have been instructed in its use by a qualified technician or your local 
dealer. 

 

 

The operators of the machine are responsible for any and all injury and damage caused to third parties within the 
machine’s radius of operation. 

 

 

All people, animals and delicate property must be kept at least 15 meters away from the machine’s radius of 
operation.  

 

 

The operators must always use the appropriate protection means and wear close-fitting work suits, heavy-duty 
shoes, gloves and protective helmets, etc. 

 

 

Goggles or face-masks, and head-phones or earplugs must also always be worn. 

 

 

The operators should always be in good physical condition, well-rested, and never under the influence of alcohol, 
drugs, or medicines. 

 

 

The machine must be operated only under conditions of good visibility and in natural daylight. 

 

 

Never use cutting tools other than those supplied by the manufacturer, and use only original spare-parts. 

 

 

Never use broken, worn-out, deformed, dented, or cracked cutting tools. 

 

 

Never start the brushcutter or keep it running in closed rooms. 

 

 

Mix and handle the fuel in the open air only far from all sources of heat, sparks or flames with the engine switched 
off. Refrain from smoking while mixing or handling fuel. 

 

 

All maintenance, repair and component replacement operations must always be performed with the engine 
switched off and all rotating parts stopped. 

 

 

All the machine’s safety systems and the protective equipment must be maintained operative whenever the 
brushcutter is being used. 

 

 

Beware of the effects of prolonged vibration. Stop working and take short pauses from time to time. 

 

 

Remember that the chopped grass and shrubs sprayed into the air can cause allergy reactions. 

 

 

Carefully read the instructions regarding appropriate clothing and adequate protection means below.

 

Содержание HO35C

































Отзывы: