PROGRAMMING - PROCEDURES (continued)
·
“Brew Wait:”
The Precise Temperature for Brewing™
feature can be overridden by setting Brew Wait to “N” for No.
By doing this, the E-Max™ will start a brew whenever the
brew switch is depressed. There will be no delay to heat to
the proper temperature.
This setting is not the recommended.
The Brew Wait is factory set at “Y” for yes. In this mode the
E-Max™ will only start a brew at the Precise Brew
Temperature.
·
“Load Defaults?”
Reloading of default settings will reset
many of the programmed settings to those outlined in the
programming table. In the table those items with “No Default”
noted in the Default column would not be reset when defaults
are re-loaded. Where a value is noted, this would be the
re-loaded value if defaults are loaded. Re-loading of defaults
should be used only if major programming problems have
occurred and it is necessary to return to factory settings.
15
MAX WATER
LOCATION
ELEVATION
BOILING POINT
TEMP SETTING
Colorado Springs, CO
6,012 ft.
200ºF
198ºF
Denver, CO
5,280 ft.
202ºF
200ºF
Reno, NV
4,491 ft.
204ºF
202ºF
Salt Lake City, UT
4,266 ft.
204ºF
202ºF
El Paso, TX
3,762 ft.
205ºF
203ºF
Calgary, AB
3,428 ft.
205ºF
203ºF
Rapid City, SD
3,231 ft.
206ºF
204ºF
Los Angeles, CA
0 ft.
212ºF
210ºF
New York, NY
0 ft.
212ºF
210ºF
ELEVATION (feet)
0
50
0
1,00
0
1,50
0
2,
00
0
2,
50
0
3,
00
0
3,50
0
4,
000
4,
50
0
5,00
0
5,50
0
6,0
00
6,50
0
TEM
P
. (ºF)
195
200
205
210
215
Boiling
Point
Maximum Safe
Water Temp.
Setting
Ideal BREW
TEMPERATURE
195ºF to 205ºF
CHART 1 - Boiling and Brew Temperature by Altitude
CHART 2 - Boiling and Brew Temperatures for Selected Locations
654 p/n
73674
E-Max™
Prog
ra
mm
ing
M
a
n
ual
