PROGRAMMING - PROCEDURES (continued)
Time Functions
After Hours™ is an energy
saving mode. When After
Hours™ is activated, the
E-Max™ will allow the water
temperature to drop by 20ºF
before reheating, and in the
case of Decanter Brewers, will
turn off any warmer plates that
are turned on.
Coffee loses freshness as it sits
on the warmer. The Countdown
Quality Timer™ provides a
visual indication that previously
brewed coffee has expired.
The timer will turn the E-Max™
off at the end of the day, and
turn it back on so that the brew
water will be hot and ready for
the first brew of the morning.
Time for the E-Max™ is
maintained with a battery
backup system that will last up
to 20 years. This system also
handles power fluctuations by
maintaining time settings during
power outages. The E-Max™
battery backup system
maintains the proper time
except while in the Time
Functions menu. If a prolonged
period of time is spent in this
menu, it will be necessary to
adjust the time before ending
programming.
The day and time can be set
without going into the
programming mode. See
“Changing Day and Time” in the
Operator Level section of this
manual.
·
“After Hours™:”
can be turned off by setting to “0”. If this
feature is desired, use the 5th or 6th key to select the number
of hours of delay after last brew before After Hours™ is
activated.
·
“Quality Time:” – Countdown Quality Timer™.
This can
be turned off by setting to “0”, or set from 20 minutes to 120
minutes, 5 minute increments using the 5th and 6th keys:
Decanter
Brewers:
If the Quality Timer is activated, each
warmer plate will count down from the programmed time
when the warmer plate is turned on. Once the count down
time is reached, the appropriate warmer plate LED will flash,
and the warmer plate will remain on. Depress the warmer
plate switch to turn the warmer plate off. When the warmer
plate switch is turned on, the countdown timer will be
re-activated.
Airpot/Thermal Brewers & Tea Brewers
with Volume
Keys:
If the Quality Timer is activated, the volume LED will
flash when the countdown time has been reached if another
brew has not been started before the time expires.
Tea Brewers without Volume Keys:
No Countdown Quality
Timer feature available on these models.
·
“Timer:”
When setting times, make sure that the
AM
or
PM
is set properly to activate the timer at the right time. Set the
time for on/off as required. The sequence of settings is as
follows:
Wkday on: Weekday on HOUR & AM/PM
Wkday on: Weekday on MINUTE
Wkday off: Weekday off HOUR & AM/PM
Wkday off: Weedkay off MINUTE
Weekend settings are similar to the above.
When using the automatic timer be sure to allow 20-30
minutes for the E-Max™ to reach proper temperature from
the time it is turned on.
·
Weekend “OFF” Setting.
To set the brewer to turn off for
the weekend, set the start and stop time at the same time
(i.e. factory setting has weekend time on and off at 7:00 am
that will turn it off for the weekend.)
·
“Day:”
Set the day by using the 5th and 6th keys.
·
“Time:”
Set Hour. Hour and pm/am will flash, allowing the
proper hour to be set.
·
“Time.”
Set Minute. Minutes will flash on this setting,
allowing proper hour to be set.
13
654 p/n
73674
E-Max™
Prog
ra
mm
ing
M
a
n
ual
