manualshive.com logo in svg

Blomberg WM 26110 NBL00, Руководство пользователя, Страница: 37 / 40

Поделиться
Скачать
Blomberg WM 26110 NBL00 Скачать руководство пользователя страница 37

37    

EN

Detergent residue 

left on the laundry.

Excessive laundry might have 

been loaded in.

Do not load the washer in excess. 

Wrong program cycle and 

temperature might have been 

selected.

Select the proper program cycle and temperature 

for the laundry to be washed (See “Laundry Tips” 

& “Program Cycle Selection”).

Using insufficient amount of 

detergent.

Use the recommended amount of HE detergent 

appropriate for water hardness and soil level of 

laundry.

Using powder or granular 

detergents in cold water 

washing may leave residue on 

wash load.

Try to use a liquid detergent when washing in 

cold water.

Using wrong type of detergent.

Use liquid detergent for cold wash cycle for 

good wash results. Use proper detergents 

recommended for wools, handwashable and 

delicate items.

Clothes get tangled 

up too much in 

the drum when 

washing.

Excessive laundry might have 

been loaded in.

Do not load the washer in excess. 

Washing many items of the 

same type or size of clothes 

together.

Load the wash drum with items of different sizes.

Load is wrinkled.

Delay in unloading the washer.

Unload the washer as soon as the wash cycle 

ends. 

Wrong program cycle might 

have been selected.

Select the proper program cycle for the laundry to 

be washed (See “Laundry Tips” & “Program Cycle 

Selection”).

Excessive laundry might have 

been loaded in.

Do not load the washer in excess. 

Washer does not work. 

No light is on.

Is there power at the outlet?

Call an electrician and have the power outlet 

/ circuit breaker / fuse checked.

Washer might be unplugged.

Plug the power cord to a live and grounded 

electrical outlet.

An extension cord may be used.

Do not use an extension cord.

The “On/Off” button might have 

not been pressed.

This button must be pressed.

The washer did not start 

after the program was 

selected and the "Start/

Pause/Cancel" button 

was pressed.

The front door may be ajar.

 

“Washing” and "Start/

Pause/Cancel" lights are 

flashing after the program 

is started.

Water may have been cut off /  

Faucets may be turned off / Water 

inlet hose may be folded/ Water 

inlet strainers might be clogged.

You can restart your washer by pressing the 

"Start/Pause/Cancel" button for a short time 

after ensuring that the water is not cut off.

Program cannot be 

started or selected.

Washer may have switched to 

self protection mode due to an 

infrastructure problem (such as line 

voltage, water pressure, etc.).

Reset your washer by pressing “Start/

Pause/Cancel” button for 3 seconds. (see, 

Cancelling a Program)

Содержание WM 26110 NBL00









































Отзывы:

Нет отзывов