Blomberg WM 26110 NBL00, Руководство пользователя, Страница: 31 / 40

31
EN
Cycle time takes
longer than the
time specified in the
owner’s guide.
Water pressure may be low.
The washer will wait until there is a sufficient
amount of water, which may lengthen the
cycle time to avoid poor washing results due to
insufficient water.
Supply voltage may be low.
Cycle time is lengthened to avoid poor washing
results when the supply voltage is low.
Inlet temperature of water may
be low.
Cycle time lengthens to heat up the water when
the inlet water is cold. Also, washing time can be
lengthened to avoid poor washing results.
There may be an imbalance of
load in the drum.
The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
Number of rinse cycles might
have increased to obtain a
better rinse.
Use a proper amount of HE detergent. Reduce
the amount of detergent next time you operate
the washer.
It continuously
washes. Remaining
time does not count
down.
In the case of a paused
countdown while taking in
water: Timer will not countdown
until the washer is filled with the
correct amount of water. Time
will not count down until the
selected temperature for the
program is reached
The washer will wait until there is a sufficient
amount of water to avoid poor washing results
due to lack of water. Then the timer will start to
count down.
In the case of a paused
countdown at the heating step:
Time will not count down until
the selected temperature for the
program cycle is reached.
In the case of a paused
countdown at the spinning step:
There may be an imbalance of
laundry in the drum.
The automatic spin correction system might have
been activated due to the unbalanced distribution
of the laundry in the drum.
The laundry in the drum may be tangled up too
much. Laundry should be rearranged and re-
spun.
No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the appliance and to its environment.