manualshive.com logo in svg

Blomberg WM 26110 NBL00, Руководство пользователя, Страница: 36 / 40

Поделиться
Скачать
Blomberg WM 26110 NBL00 Скачать руководство пользователя страница 36

36    

EN

Detergent or 

softener residue 

in the dispenser/ 

Too much 

water remains 

in the softener 

compartment.

Detergent (powder) may have 

been put in wet dispenser 

drawer.

Dry the dispenser drawer before putting in 

powder detergent.

Detergent (powder) may have 

gotten damp.

Store detergent in a cool and dry place. Do not 

keep them under high temperatures.

Softener may be too dense or 

concentrated.

Dilute the softener by pouring some warm water 

on it (dilute up to max fill line). 

Water pressure might be low.

 

Detergent might be mixed with 

the bleach/softener.

Softener/bleach should not come into contact 

with detergent when being added.

Washer vibrates, 

shakes or makes 

too much noise.

Feet might require adjustment.

Adjust the washer feet (See “Levelling the 

Washer”).

Shipping bolts might not have 

been removed.

Remove the shipping bolts (See “Removing 

Transport/Shipping Bolts”).

There may be a small amount of 

laundry in the drum.

Add more laundry to the drum for even load 

distribution next time you operate the washer.

The drum may be overloaded or 

the clothes may be distributed 

unevenly.

Reduce the amount of laundry in the drum or 

balance the load by hand next time you operate 

the washer.

The appliance might be 

touching a solid surface.

Ensure that nothing touches the washer.

Strange noise in the 

drain pump.

This is not a problem. Lapping 

sound is normal at the end of 

the drain operation.

It is not harmful to your washer.

Clanking noise in 

the drum.

Metal objects such as coins, 

pins may be in the drum.

Stop the program cycle (See “Cancelling a 

Program”) ,check the drum for any foreign 

objects.

Water fill 

temperature is 

incorrect.

Water inlet hoses or valves may 

be clogged.

Disconnect inlet hoses from the valves. Clean inlet 

strainers and valve filters of any debris.

There may be a long distance 

between the water heater and 

washer. 

Run the hot water faucets in the bathroom or 

kitchen (whichever is close to the location of your 

washer) for a short time to purge the hot water 

line.

There may be a problem with 

water heater.

Be sure that your water heater is delivering hot 

water min 120F (49C) at the faucet.

Содержание WM 26110 NBL00









































Отзывы:

Нет отзывов