Blomberg WM 26110 NBL00, Руководство пользователя, Страница: 22 / 40

22
EN
C
You can use “No spin” selection
in order to drain the water without
spinning at the end of program cycle.
For Cottons/Regularwash cycles,
spin speed can be adjusted between
800-1100 rpm (including no spin).
For wools and delicates cycles, spin
speed can be adjusted between No spin
- 600 rpm.
For permanent press cycles, spin speed
can be adjusted between No spin - 800
rpm.
Auxiliary functions (Options)
Auxiliary function selection
You should not select Quickwash
and Superwash at the same time.
Superwash will be cancelled and
Quickwash will remain active in such a
case.
Auxiliary function that is not compatible
with the program cycle cannot be
selected.(See, Program Cycle Selection
Table).
Quick wash
This function can be used for Cotton/
Regularwash and Permanent Press
programs. It decreases the washing
times for lightly soiled items.
Super wash
This function can be used for all wash
cycles except for “Soak”. It increases
washing times for heavily soiled items for
good wash results. Washer will only take
in cold water when this option is chosen.
Extra rinse
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins’ risk of being affected by
the remaining detergent on the clothes
will be decreased.
Time delay
If you wish to wash your clothes at a
later time, with the time delay function
you can delay the program start up 3
hours, 6 hours or 9 hours
1. Open the loading door, place the
laundry inside and fill detergent
dispenser.
2. Set the washing program,
temperature, spin speed and, if
required, the auxiliary functions.
3. When the time delaying button is
pressed once, a 3 hour delay is
selected and the relevant led lights.
When the same button is pressed
again, 6 hours; and if pressed once
more, 9 hours delay will be selected.
If the time delaying button is pressed
one more time, time delaying function
will be cancelled. Set the time delay
as you require.
4. Delayed operation of the selected
program is started by pressing the
“Start/Pause/Cancel” button after
making the time delay selection.
C
More laundry may be loaded/
removed during the time delay period.
Changing and canceling the time
delay.
1. Press the “Start/Pause/Cancel”
button to switch the washer to
“Pause” mode.
2. Press “Start/Pause/Cancel” button
to start the program after making the
new time delay selection.
C
In the event that any of the lights of
3-6-9 options does not light up after
selecting the new time delay, it means
that time delay function is cancelled.
Starting the Program
1. Press “Start/Pause/Cancel” button to
start the program.
2. “Start/Pause/Cancel” button will light
up to indicate that the program has
started.
3. The door is locked and the “Ready”
light fades.
Progress of a program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator lamp will light up
and the light of the completed step
will turn off. The symbol that is lit up
at the far right of the series of symbols
indicates the step that is being carried
out.