Blomberg WM 26110 NBL00, Руководство пользователя, Страница: 23 / 40

23
EN
The “Wash” light on the program follow-
up indicator lights up when “Start/
Pause/Cancel” button is pressed after
selecting the washing program. “Spin”
lamp will light up at the final spin step.
The “Ready” lamp will light up again
when the program is over and the door
is unlocked.
You can put your washer into “Pause”
mode by pressing the “Start/Pause/
Cancel” button when it is operating. In
this case, “Start/Pause/Cancel” light will
flash.
3
If the washer is not spinning, the
automatic spin correction system
has been activated because of
unbalanced distribution of laundry in
the drum.
Changing the selections after
the program has started
You can use this feature after your
washer has started to wash different
load types in the same batch of clothes
under higher or lower temperatures.
For example;
Press and hold the “Start/Pause/
Cancel” button for 3 seconds to
“Cancel” the program in order to select
“Permanent Press Warm” program
instead of “Permanent Press Cold”
program.
Select the “Permanent Press Warm”
program by rotating the cycle selector
knob.
Press “Start/Pause/Cancel” button to
start the program.
C
The program which is selected
first will go on even if the program
selection button is moved and
another program mode is selected
while the washer is operating. You
must cancel the ongoing program
in order to change the washing
program. (See, Cancelling a Program)
Selecting or cancelling an auxiliary
function /spin speed
1. Press the “Start/Pause/Cancel”
button to switch the washer to
“Pause” mode.
2. Change the auxiliary function, and/or
spin speed.
3. Press “Start/Pause/Cancel” button to
start the program.
C
The selection to be made must be
in accordance with the step the
program is at. For example, if your
washer is on the main wash cycle
or on the first rinse cycle, you may
select extra rinse auxiliary function.
Super wash option may not be selected
on any circumstances once the wash
cycle begins.
Quick wash option may only be selected
when your washer is on the main wash
cycle.
C
The spin speed which is selected first
will keep on being valid even if the
position of the spin speed selection
knob is changed. Press “Start/
Pause/Cancel” button and switch the
machine to “Pause” mode in order
to change the spin speed. New spin
speed can be selected. Spin speed
selection can be changed until the
end of final rinse cycle.
Adding/removing laundry in standby
mode
If you want to add more laundry into
the drum after the washing cycle has
started, put the machine into “stand
by” mode by pressing the “Start/Pause/
Cancel” button. The “Ready” lamp on
the program follow-up indicator will light
up after 1-2 minutes if the water level
and temperature the drum is suitable.
Laundry may be added or taken out by
opening the door. If the “Ready” lamp
does not light up continuously at the
end of this time, the water level and
temperature in the washer is not suitable
and laundry cannot be added. You can
resume the program by pressing the
“Start/Pause/Cancel” button again.
Child-proof lock
There is a childproof lock to prevent
any program interruption because of
pressing the keys while the program is
on. In order to activate the childproof