Blizzard 57520-1, Руководство пользователя

Страница: 29 / 40

Lit. No. 40688, Rev. 04 29 May 1, 2012
5. Repeat Step 4 on the passenger's side.
6. Push and hold the Power switch RIGHT and push
UP the Arm/Blade Operation switch. The arm will
engage the mount adapter and pull the snowplow
tightly to the vehicle.
7. Rotate and pull the hitch pin. Rotate the hitch pin
into the retracted position.
8. Repeat Step 7 on the passenger's side.
9. While holding the Power switch RIGHT, push
DOWN and hold the Arm/Blade Operation switch
to fully lower the arm.
10. Unplug the electrical harnesses.
NOTE: After each use of the snowplow, reapply
dielectric grease to the electrical plugs to
maintain the protective coating on the terminals.
11. Place the electrical plugs in storage position. The
plugs are equipped with plug covers.
CAUTION
On 2-plug electrical systems, plug covers
shall be used whenever the snowplow is
disconnected. Vehicle Battery Cable is 12-volt
unfused source.
REMOVING SNOWPLOW FROM VEHICLE & STORAGE
Hitch
Pin
Pin
Handle
Mount
Adapter
Pin
Guide Plate