Blizzard 57520-1, Руководство пользователя

Страница: 35 / 40

Lit. No. 40688, Rev. 04 35 May 1, 2012
MAINTENANCE
FUSE REPLACEMENT
The vehicle control harness contains two automotive
blade-style fuses. The snowplow control and park/turn
power are both covered by a 10-amp fuse. The control
fuse is "hot" when the vehicle ignition switch is ON
and the electrical connections to the snowplow are
completed.
See the Harness Diagram at the end of this manual for
fuse ratings and locations.
The hydraulic unit harness system contains three
automotive blade-style mini-fuses. The 3-solenoid
coil harness (to Port B on the hydraulic unit module)
contains two 5-amp mini-fuses. The 2-solenoid coil
harness (to Port C on the hydraulic unit module)
contains one 5-amp mini-fuse.
If a problem should occur and fuse replacement is
necessary, the replacement fuse must be of the same
type and amperage rating as the original. Installing a
fuse with a higher rating can damage the system and
could start a
fi re.
VEHICLE
The snowplow operating vehicle shall be maintained
according to manufacturer's recommendations.
Tire pressure shall be maintained according to
manufacturer's recommendation.
RECYCLE
When your snowplow has performed its useful life, the
majority of its components can be recycled as steel or
aluminum. Hydraulic
fl uid shall be disposed according
to local regulations. Balance of parts made of plastic
shall be disposed of in a customary manner.
BLADE FINISH
If the powder-coated fi nish is nicked or scratched,
repair the blade surface with BLIZZARD
®
white or
black paint (available in aerosol or quart cans from
your BLIZZARD outlet). Clean and repaint parts as
necessary.
EMERGENCY PARTS/TOOLS
We suggest that you keep a BLIZZARD emergency
parts kit (PN 40589) in your vehicle. These kits contain
BLIZZARD hydraulic
fl uid, dielectric grease, common
hoses, fi ttings, switches, pins, clips and a motor relay.
Also keep the following items in your vehicle for
emergency use:
• 10" adjustable wrench
• Pliers (locking, adjustable, etc.)
• Medium screwdriver
• 11/16" open-end wrench
• 3/4" open-end wrench
• 5- and 10-amp automotive blade-style mini-fuses
• Miscellaneous fasteners
Always use BLIZZARD designed and tested
replacement parts.
TROUBLESHOOTING
If you have followed all of the guidelines in
the Maintenance section of this manual and
cannot resolve issues with the operation of your
BLIZZARD snowplow, contact one of our authorized
dealers for repair information, or visit us online at
www.blizzardplows.com . Our Web site has a complete
listing of authorized dealers in your area as well as a
complete library of Parts Lists, Mechanic's Guides and
service information to assist the quali
fi ed mechanic
with repair.
Blizzard does not recommend repairs by other
than our factory-trained outlets. Failure to use an
authorized outlet could affect the warranty coverage
on your snowplow.