Blizzard 57520-1, Руководство пользователя

Страница: 28 / 40

Lit. No. 40688, Rev. 04 28 May 1, 2012
REMOVING SNOWPLOW (OFF)
During the off-season, the control can be removed.
Disconnect the connector in the cab and store the
control in the glove box of the vehicle.
1. Lower the snowplow onto the ground with the
blade straight. Turn the plow control in the
cab OFF.
REMOVING SNOWPLOW FROM VEHICLE & STORAGE
WARNING
Keep 8' clear of the blade when it is being
raised, lowered or angled. Do not stand
between the vehicle and blade or directly in
front of the blade. If the blade hits or drops on
you, you could be seriously injured.
WARNING
Inspect snowplow components and fasteners
for wear or damage whenever mounting or
removing the snowplow. Worn or damaged
components could allow the snowplow to
drop unexpectedly.
2. Move the Power switch to the center, or "OFF,"
position.
3. While holding the Power switch RIGHT, push
DOWN and hold the Arm/Blade Operation switch.
The arm will disengage the mount adapter to
relieve tension on the stand.
4. Pull the stand pin out. Rotate the stand down until
the stand pin seats into the lower A-frame hole.
The stand pin must lock into the lower A-frame
hole. Push down on the top of the shoe. The shoe
will be on the ground.
Light
Tower
Power
Switch
Arm/Blade Operation
Switch
Switch
Label
ARM/BLADE
OPERATION POWER
OFF
Raise
Lower
Plowi
n
g
A
rm/Bl
a d
e
Opera
ti o
n
OFF
48207
Power Switch
Arm/Blade
Operation Switch
Hitch Pin
Mount
Adapter
Arm
A-Frame
Upper Hole
Stand Pin
Stand Handle
Light Tower
Boot
Blade
Stand
Shoe
OFF