10. Sensitivity. Mode "Explosion" and mode "Waft". Mode
without audio threshold (silent mode) and mode with audio
threshold.
The sensitivity of BLISSTOOL LTC64X is set complex from potentiometers GAIN, THRESHOLD and
SILENCER, not just with a single potentiometer. In this respect, in BLISSTOOL LTC64X are available
two basic modes for work: mode "Explosion" and mode "Waft". Broadly speaking, the metal detector
operates in mode "Explosion" when turn off the silencer (SILENCER at level "OFF"), and in mode
"Waft" when turn on the silencer (SILENCER at levels from "1" to "MAX", but mostly at higher levels
(from "5" to "MAX"). In both modes, in order to achieve top performance, the metal detector must be
balanced to the ground, and if necessary stabilized by potentiometers TONE and FREQUENCY.
BLISSTOOL LTC64X be brought in the mode "Explosion" in increasing its sensitivity
up to the maximum possible or close to it.
For example, in the following settings: GAIN =
"8" or "MAX", THRESHOLD = "6.0" or "6.5", SILENCER = "OFF". In this mode, the audio
threshold of the metal detector is likely to be more or less unstable, but at the expense of this,
the deep weak signals are detected with a powerful rich sound resembling an explosion, ie with
a sound volume similar to the volume with which are detect shallow buried metal objects. This
mode allows faster and more casual search, as the deep weak signals are detected with
sufficiently powerful and easily audible sound, and do not need constant monitoring from the
user, to the nuances in the sound threshold, as in mode "Waft". On the other hand, because of
the instability of the audio threshold and the possible occurrence of false signals, mode
"Explosion" is suitable only for experienced users and is not recommended for beginners. In
order to maintain the sensitivity and depth of detection, and at the same time providing a
comfortable search, mode "Explosion" can be combined with silent mode, ie mode without
audio threshold. For this purpose, the THRESHOLD potentiometer is set to one or two levels,
before the level in which is available audio threshold. For example, in the following settings:
GAIN = "MAX", THRESHOLD = "5", SILENCER = "OFF".
BLISSTOOL LTC64X be brought in mode "Waft" while increasing its sensitivity to a
level at which remains stable and smooth sound threshold of the metal detector.
For
example, in the following settings: GAIN = "6", "8" or "MAX", THRESHOLD = "6.0" or "6.5",
SILENCER = "5" (or a level from "1" to "MAX"). In this mode, the audio threshold of the metal
detector is perfectly smooth and even, without false signals, ie the metal detector buzzing like
a bee. In consequence, the deep weak signals are detected as shade with greater force of the
sound threshold, ie as waft and for their noticing, ie hearing, is required more attention from
the user, in combination with a slower and more careful search. For comparison, the same
deep weak signals in mode "Explosion" are detected with a strong and easily audible sound,
but the metal detector is not quite as stable. Mode "Waft" allows comfortable search in mode
with audible threshold and also in silent mode. It is suitable for both beginners and advanced.
BLISSTOOL LTC64X brought into mode without audio threshold (silent mode) when
THRESHOLD potentiometer is set at a level at which there is no audio threshold, ie
the metal detector is not buzzing.
For example, with the following setting: THREHOLD =
"5". In order to preserve sensitivity and good depth of detection, is recommended THREHOLD
to not be decreased by more than one or two levels from the level at which appears sound
threshold. For example, if the sound threshold appears when THRESHOLD = "6.5", then for set
at optimal silent mode, THRESHOLD can be set at "5.5", "5.0" or "4.5".
BLISSTOOL LTC64X brought into mode with audio threshold when THRESHOLD
potentiometer is set at a level that starts to beep audio threshold, ie the metal
detector buzzing.
For example, with the following setting: THREHOLD = "6.5" or "7.0". By
potentiometer THRESHOLD, the density of the the buzz, can be adjusted according to the
desire of the user and the field conditions, ie the buzz can only be hints or even hears tightly
buzz. Recommended the buzz to be neither very strong, nor very weak, ie to achieve threshold
level, wherein the metal detector has the best sensitivity.
BLISSTOOL LTC64X
- User Guide (version EN201405101504)
Page 34 of 42
