Never leave the LiPo battery deeply discharged, as this will damage it completely or dramatically will
lowered its capacity and life. Charge the LiPo battery, best, after about every 18-25 hours work with
the metal detector. You can charge the LiPo battery at any time, no matter how discharged is it.
If you no longer use your BLISSTOOL metal detector, make sure that before "winterizing", you are
completely charged the LiPo battery and charge the battery at least once a month. If the LiPo battery
stays longer than 2-3 months discharged, especially if it is deeply discharged, it will be damaged.
The standard package with the metal detector includes one of the following models automatic LiPo
battery charger described by the difference in their LED indicators:
/1/ If the automatic LiPo battery charger has three LED indicators, and in off state, they are with white
or yellow colors:
- During the charge, indicators A, B and C light in red color;
- After completing the process of charge, indicators A, B and C light in green color.
/2/ If the automatic LiPo battery charger has two LED indicators, and in off state, they are with white
color:
- During the charge, the first indicator light in red color, and the second light in green color;
- After completing the process of charge, the first indicator light in red color, and the second is off.
/3/ If the LED indicators A, B and C of the automatic LiPo battery charger, in off condition, are with
colors red for A, red for B and green for C:
- During the charge, indicators A and B light in red, and C not light;
- After completing the process of charge, A light in red, B not light, and C light with green color.
In most of the models automatic LiPo battery chargers, offered with the standard package, the power
adapter ~100-240V/DC12V is not a separate element, but is included in the box with the electronics of
the automatic LiPo battery charger.
14. Practical advices
The metal detector BLISSTOOL LTC64X is designed to find metal objects buried in the ground.
It does not work well in residential areas and rich urban environment because it is highly
sensitive electronic device and is troubled by surrounding electric devices, systems with
electricity and metal objects (metal parts of the structure of the property, equipment and
furnishings of the property). Therefore, when working in residential areas, the metal detector
may be unstable, nervous, to give false signals. Typically in such conditions can not be
demonstrated and measured its maximum parameters. If you want to measure the maximum
parameters of your metal detector, do the test in terrain outside the settlement, ie where you
will search for buried metal objects. There, the metal detector has maximum appropriate
behavior and parameters.
When working with the metal detector near another metal detector, they can interfere with
each other. This is inevitable in cases where the metal detectors operate on the same or similar
operating frequency. Such are the metal detectors from the same brand and model, but not
limited, because at the same operating frequency able to work and other than their metal
detectors. Disturbance is expressed in the issuing of periodicals, evenly and pulled sounds
from the metal detector.
You can limit or completely eliminate this interference by appropriate adjustment of FREQUENCY
potentiometer, as described in 9.2.
If during work with the metal detector, you on the call via mobile phone or your mobile phone
rings, is possible the metal detector to be troubled by it. Usually the metal detector does not
interfere with mobile phone in standby mode, except where the terrain on which you are, a
mobile operator's signal is weak or lost. In this case, even in standby mode, your mobile phone
periodically tries to connect to the nearest mobile cell of the used by you mobile operator, with
the result that it can cause a periodic disturbance of the metal detector.
BLISSTOOL LTC64X
- User Guide (version EN201405101504)
Page 38 of 42