Blaze ASV-2 Operating Manual
Page 10
Test Alt Encoder:
This is a handy function to test the ASV-2 transponder interface once the installation has been completed. The serial
output will output specific altitudes which can then can be used to test the serial RS232 output and the parallel gillham
output if using a CNV-ALT converter. The ASV-2 will resume the normal output of the indicated altitude upon exiting the
test function.
The following codes are outputted:
Altitude
D4
A1
A2
A4
B1
B2
B4
C1
C2
C4
-1000ft
0
0
0
0
0
0
0
0
1
0
-900ft
0
0
0
0
0
0
0
1
1
0
-700ft
0
0
0
0
0
0
1
1
0
0
-400ft
0
0
0
0
0
0
1
0
1
1
-200ft
0
0
0
0
0
1
1
0
0
1
800ft
0
0
0
0
1
1
0
0
0
1
2800ft
0
0
0
1
1
0
0
0
0
1
6800ft
0
0
1
1
0
0
0
0
0
1
14800ft
0
1
1
0
0
0
0
0
0
1
30800ft
1
1
0
0
0
0
0
0
0
1
Each altitude reporting code line must be tested for integrity of connection if at any time the aircraft connections to the
transponder or altitude data source have been removed and reconnected. Integrity of the connections may be verified by
performing a test of mode C function of the transponder system.
Warning:
Do not use this function while in flight as incorrect altitude information will be sent to
the transponder.
