background image

Blaze ASV-2 Operating Manual

Page 21 

12 Cleaning

The unit should not be cleaned with any abrasive substances. The screen is very sensitive to certain cleaning materials
and should only be cleaned using a clean, damp cloth. 

13 Warranty

This product carries a warranty for a period of one year from date of purchase against faulty workmanship or defective
materials,   provided   there   is   no   evidence   that   the   unit   has  been   mishandled   or  misused.   Warranty  is  limited   to   the
replacement of faulty components and includes the cost of labor. Shipping costs are for the account of the purchaser. 

14 Disclaimer

Operation of this instrument is the sole responsibility of the purchaser of the unit. The user must make themselves familiar
with the operation of this instrument and the effect of any possible failure or malfunction.

This  instrument  is not   certified  by  the  FAA.  Fitting  of  this instrument  to  certified  aircraft  is  subject   to  the  rules and
conditions pertaining to such in your country. Please check with your local aviation authorities if in doubt. This instrument
is   intended   for   ultralight,   microlight,   home   built   and   experimental   aircraft.   Operation   of   this   instrument   is   the   sole
responsibility of the pilot in command (PIC) of the aircraft. This person must be proficient and carry a valid and relevant
pilot’s license. This person has to make themselves familiar with the operation of this instrument and the effect of any
possible failure or malfunction. Under no circumstances does the manufacturer condone usage of this instrument for IFR
flights.

IMPORTANT NOTICE:

You must make your own determination if the products sold by MGL Avionics are safe and effective for your intended 
applications. MGL Avionics makes no representations or warranties as to either the suitability of any of the products we 
sell as to your particular application or the compatibility of any of the products we sell with other products you may buy 
from us or anywhere else, and we disclaim any warranties or representations that may otherwise arise by law. Also, we 
offer no specific advice on how to install any of the products we sell other than passing along anything that may have 
been provided to us by the manufacturer or other issues. If you are in need of further information or guidance, please turn 
to the manufacturer, FAA Advisory Circulars and guidance materials, the Experimental Aircraft Association, or other 
reputable sources.

Note:  

Product   warranty   excludes   damages   caused   by   unprotected,   unsuitable   or   incorrectly   wired

electrical supplies and or sensors, and damage caused by inductive loads.

Warning:

  The  ASV-2  is not waterproof, serious damage could occur if the unit is exposed to

water and/or spray jets.

Continuing development sometimes necessitates specification changes without notice.

Содержание ASV-2























Отзывы: