180-CL2714.IPI v1.01
April 21, 2021
Page 34
Clarity CL2714 IPI
MAINTENANCE and SERVICE
GLASS DOOR REPLACEMENT
The glass in this appliance is a 5 mm anti-
re
fl
ective high temperature ceramic glass that
will easily withstand the heat that is produced.
In the event the glass breaks or cracks, contact
your dealer to arrange for your glass door to be
replaced with a factory replacement (see
“PARTS
LIST”
). Do not operate this appliance with the
glass front removed, cracked, or broken. Removal
and replacement of the glass from the door must
be done by a quali
fi
ed service technician. The
glass door must be purchased from a Blaze King
dealer. No substitute materials are allowed.
BURNER REMOVAL
1. Turn o
ff
the appliance and allow it to cool down
completely.
2. Remove the safety screen trim, and glass
door. (see
“SAFETY SCREEN TRIM AND
GLASS DOOR REMOVAL”
on previous page)
3. Remove the
fl
oor glass if applicable, and
fl
oor
plate, set aside.(
Fig.4
)
4. Remove the screw from the right hand side of
the burner assembly.(
Fig.5
)
5. Move the burner to the right, up, and out.
To re-install the burner follow steps 1 to 5 in
reverse. Ensure the burner is centered in the
curved burner slot of the glass
fl
oor plate.
Fig.4
FLOOR PLATE
SCREW
BURNER
Fig.5
