180-CL2118.IPI.1 v1.00
August 5, 2020
Page 30
CL2118.IPI.1
INITIAL SETUP
1. Remove the safety screen, and door glass
as shown in “
GLASS DOOR REMOVAL
”, set
assemblies aside.
2. REMOVE THE STATIC CLING LABEL THAT
IS ON THE DOOR GLASS
. Hold glass to
frame when removing as it is only held in place
with silicone. Set the door glass assembly
aside.
3.
Remove packaged contents from firebox
and unwrap,
HANDLE GLASS CAREFULLY
BY THE EDGES, DO NOT LEAVE
FINGERPRINTS, CLEAN IF NECESSARY
.
One package contains the floor glass, the other
contains the side panels. Set glass panels
aside in a safe place.
4.
Remove floor plate assembly from appliance
and set aside. (
Fig.14
)
5. Loosen the top left tab as shown by arrow,
install the left glass up under the tab and onto
the support. (
Fig.15
)
NOTE: THE SIDE WITH
LABEL SHOULD BE FACING THE FIREBOX,
REMOVE BEFORE FIRING.
Retighten the
tab.
HANDLE GLASS CAREFULLY BY THE
EDGES, DO NOT LEAVE FINGERPRINTS,
CLEAN IF NECESSARY.
6. Repeat Step 5 for the right side panel.
7.
Carefully place the floor plate assembly back
into position.
8.
Place the floor glass on top of the floor plate
assembly.
(Fig.16)
NOTE: SMOOTH SIDE
SHOULD FACE UP
.
INSTALLATION
Fig.15
Fig.16
Fig.14
