180.OM.CL26.FS.IPI E v1.02
September 6, 2017
Page 17
Clarity 26 FS IPI
MAINTENANCE and SERVICE cont.
BURNER REMOVAL
1. Turn off the appliance and allow it to cool down
completely.
2. Remove the glass door and safety screen (see
“GLASS DOOR REMOVAL”
on previoius page
and
“SAFETY SCREEN REMOVAL”
below)
3. Remove the glass fl oor plate and set it aside.
(
Fig.3
)
4. Remove the fl oor plate assembly and set it
aside.(
Fig.3
)
5. Remove left and right glass panels by loosening
the tab on the top edge closest to the door. Set
the panels aside.
6. Remove the screw from the right hand side of
the burner assembly.(
Fig.3
)
7. Move the burner to the right, up, and out.
To re-install the burner follow steps 1 to 7 in
reverse.
SAFETY SCREEN REPLACEMENT
The CLARITY 26 FS is supplied with a safety
screen pre-installed behind the front legs. If
the safety screen becomes damaged it must be
replaced with part #645.1821
1. Turn off the appliance and allow it to cool down
completely.
2. Remove the top lid assembly from the top of
the appliance and set it aside.(
Fig.4
)
3. Slide the safety screen up and out.
4. Slide the new safety screen in between the
front legs and the brackets. Ensure screen
mesh faces out, furthest from glass.
5. Place the top lid assembly back into position.
Fig.3
Fig.4
SCREW
SCREEN
MESH TO
THIS
SIDE