Blaze King APEX CBT, Руководство по установке, эксплуатации и обслуживанию для пользователей

Страница: 9 / 45

Version 1.04
March 2011
APEX cbt Page 9
www.blazeking.com
GENERAL
INSTALLATION IS TO BE PERFORMED BY A QUALIFIED INSTALLER
Please take time to read these instructions thoroughly. Not following the instructions could
result in a faulty installation causing serious problems. Along with these general instructions
you must follow the specific instructions which pertain to your particular installation i.e.: add-on
to electric, gas, oil or independent installations.
FREIGHT DAMAGE
This product was carefully inspected before it left Blaze King. Inspect the unit thoroughly upon
its arrival. If damage is found report it to the carrier and then immediately file a freight damage
claim. Your local Blaze King dealer will assist if required.
PARTS INCLUDED WITH THE APEX CBT
1. 2 Fan limit controls and bracket
2. Thermostat
3. Rake
4. Ash shovel
5. Insulation strips (3 pieces)
6. Digital Combustor thermometer
7. This manual
OPTIONAL EQUIPMENT
1. Blower and cabinet for independent use (900 cfm. to 1200 cfm.), see page 27.
2. 24 volt control transformer
USAGE
The APEX CBT may be installed as follows:
1. An add-on to any of the following furnaces:
A. An electric forced air furnace rated at 15 KW to 27 KW with a minimum size fan of
900 cfm. (see page 22)
B. A forced air gas furnace with a maximum output of 120,000 btu. and a minimum
size fan of 900 cfm. (see page 24)
C. An oil furnace having an oil input as shown on the nameplate of not more than 1.2
usgph. and a fan capacity of not less than 900 cfm. (see page 24)
2. As an independent forced air wood furnace equipped with a blower of not
less than 900 cfm. Capacity (see page 26).
INSTALLATION INSTRUCTIONS