HOLD
Fully
ƒ»•ƒfl¥
e›ƒ»?•–?¤·ƒ¢•ƒ·?•'¢fl?SO
°
Save & Exit
x2
SO
° +
S?¶ƒ⁄¶
vary speed gradually for approx. 200 steps
refrain from sitting during programming
x2
x2
Q?¶ƒ⁄¶
x2
vary speed gradually for approx. 200 steps
refrain from sitting during programming
vary speed gradually for approx. 200 steps
refrain from sitting during programming
x3
Q?¶ƒ⁄¶
x2
Q?¶ƒ⁄¶
x3
x2
x1
x2
x2
HOLD
Fully
ƒ»•ƒfl¥
e›ƒ»?•–?¤·ƒ¢•ƒ·?•'¢fl?SO
°
Save & Exit
x2
SO
° +
S?¶ƒ⁄¶
vary speed gradually for approx. 200 steps
refrain from sitting during programming
x2
x2
Q?¶ƒ⁄¶
x2
vary speed gradually for approx. 200 steps
refrain from sitting during programming
vary speed gradually for approx. 200 steps
refrain from sitting during programming
x3
Q?¶ƒ⁄¶
x2
Q?¶ƒ⁄¶
x3
x2
x1
x2
x2
9
8
Limb Setup
8.1
SmartIP Operation
8.2
Fine Tuning
The instructions in this section are for both practitioner and user.
Adjust for static alignment as shown in the ESK+ fitting instructions supplied with the module.
Cushion Valve adjustment - If after programming for the first time, the user experiences too much
or too little damping at the end of the swing, the cushion valve may be adjusted. (See
) Fine Tuning MUST always follow any cushion valve adjustment. (See
The instructions in this section are for practitioner use only.
Initial Set Up (First Time Use)
Calibrate Limb to User
& Enter Program Mode
Programming
START
UNTIL
STOP
SAVE
& EXIT
START
2 sec
4 sec
2 sec
4 sec
Fully
Extend
Fully
Flex
Fully
Extend
Fully
Flex
Fully
Extend
Fully
Flex
Fully
Extend
HOLD
Vary speed gradually for aprox. 200 steps
Refrain from sitting during programming
Maximum 6 seconds
Approx. 12 m (40’) required
HOLD
Flex more
than 40º
Fully
Extend
HOLD
Fully
Extend
Fully
Flex
Fully
Extend
Fully
Flex
Fully
Extend
Vary speed gradually for aprox. 200 steps
Refrain from sitting during programming
Flex more
than 40º
Fully
Extend
Maximum 6 seconds
SAVE
& EXIT
HOLD
938250PK2/1-0421