11
Assembly Instructions
11.1
Changing Front Stop Buffer
16
When fitting a new front stop, always re-adjust, and if applicable check length of cylinder if fitted
with an adjustable trunnion. (See
Front Stop Adjustment - Adjustable Trunnion
.)
The instructions in this section are for practitioner use only.
424
Remove shin stops and remainder of
adhesive. Clean and lightly abrade mating
surfaces.
Shin Stops
Apply Loctite 424 on mating surfaces. Press
shin stops into place.
Mating Surfaces
11.2
Changing Shin Stops
1
2
1
2
938250PK2/1-0421