9
p)
Only use HV46 hydraulic oil (E00481), non-compatible fluids could cause damage to the unit or serious
injury.
q)
At least one time during year oil from system and the filter should be replaced.
r)
Work on hydraulic equipment or operating materials may only be undertaken by a skilled hydraulic
engineer or by trained persons under the guidance and supervision of a skilled hydraulic engineer as well
as in accordance with the hydraulic engineering regulations.
s)
Hoses and pipe work can be under high (hydraulic) pressure. The temperature can be above 37° C. Use
only hoses and pipe work that are sized and marked in accordance with the overall power consumption of
the machine.
t)
A second person must be deployed who can disengage the hydraulics in an emergency if work on live
parts is necessary. The work area must sealed off using a red and white safety chain and a danger sign.
For the electrical parts, use a tool that is insulated against voltages.
3.7
Dust collector safety by a machine
a)
Always use a Blastrac dust collector to ensure a dust-free operation of the machine and clean air at the
workspace. Also the airflow helps to cool the machine and prevents overheating.
b)
Read the operating instructions of the dust collector before using it.
c)
The dust container/bag of the dust collector must be emptied regularly. Comply with the local waste
treatment regulations considering the removed material.
d)
The dust hose must be connected properly with a hose clamp and industrial tape.
e)
The dust hose must be undamaged and free of obstructions.
f)
Always switch on the dust collector first!
3.8
Maintenance safety
a)
Pull out the main plug and place it in sight, before changing the drum or starting inspections and repairing
on the machine. Pull out the key of the dead man’s switch and keep it in your pocket.
b)
Wait for a standstill of all drives before any inspections, adjustments and/or maintenance work is started.
c)
Block the machine in a stable position before doing any maintenance work.
d)
Failures due to inadequate or incorrect maintenance may generate very
high repair costs
and long
standstill periods of the machine.
Regular
maintenance therefore is imperative.
e)
Operational safety and service life of the machine depends, among other things, on proper maintenance.
f)
Prevent premature wear by keeping the machine as dust free as possible. Clean the machine for this
reason regularly with a dust collector and non-aggressive materials. Never use a high pressure water
cleaner to clean the machine.
g)
Do not use any
aggressive
cleaning materials!
h)
Use lint-free
cleaning cloths
!
i)
Please advise the OWNER’S MANUAL of the diesel engine for additional information.
j)
It is advisable to stock all spare parts or wear parts that cannot be supplied quickly. As a rule, production
standstill periods are more expensive than the cost for the corresponding spare part.
k)
The suitable precautions include decontamination before disassembling the machine, adequate filtered
ventilation of the exhaust air from the room in which it is disassembled, cleaning of the maintenance area
and suitable personal protection equipment.
l)
Always read the enclosed OWNER’S MANUAL of the Hatz diesel engine before operating the machine.
m)
The OWNER’S MANUAL contains important information about getting the best performance and safe
operation / maintenance of the diesel engine.
n)
The OWNER’S MANUAL should be considered a permanent part of the engine and should remain with the
engine if resold.
