16
lateral axle. When the depth adjustment is correctly selected, the scarifier will run quiet and constant.
Oval worn flails or cutters as well as broken drum axles indicate a too "high" scarifying depth
adjustment.
6.
Dead man’s switch
The key of the dead man’s switch is attached to a cord. The cord should be fastened on the arm of the
operator. When the key is pulled out, the machine will stop immediately.
7.
Driving lever
The drive unit control lever is used to control the machine’s drive unit. The function of the drive unit
control lever begins after adjusting the working depth of the machine with the quick lift. You should
pay attention that the drive unit control lever is locked in the neutral position before manipulating the
quick lift.
11.
Emergency shutdown button
Red mushroom-shaped shutdown push button, this button cuts off the power to the motors.
Turn to unlock the emergency stop button.
12.
Hydraulic motor ON/OFF buttons
Pressing the green start button will start the driving motor, use the driving lever to start driving. The
hydraulic motor hast to be switched on before switching on the scarify motor. The red button will stop
the hydraulic motor.
13.
Control light “Phase incorrect”
This lamp shines when the phases of the power supply are incorrect. The power plug has a built in
phase inverter for easy and quick changing of the phases if the control light “Phase incorrect” lights up.
14.
“Scarify motor” ON/OFF buttons
Pressing the green start button will start the scarify motor. Before starting the scarify motor, the
treadle of the drive system must be in de downwards position and the quick lift lever must be in the
upwards position.
16. Plug for power supply
The plug for the power supply has a built in phase inverter.
If the motor turns the wrong way, just unplug the machine and change the phase inside the plug.
