4
1. Introduction
Before use, operators must be provided with information, instruction and training for the use of the machine
and the substances for which it is to be used, including the safe method of removal and disposal of the
material collected. All persons who are working with or maintaining this machine must read the manual
carefully and understand it fully. In case you sell the unit, hand it on to the next owner.
Keep this manual always with the machine, to enable it to be referred to at any time.
Any other work not covered by this operating manual must not be carried out.
This machine is designed for industrial use by professionals. Only authorized and trained personnel may
operate this machine. This machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge.
Blastrac BV
offers a course on
the use of the machine in order to make the operating and maintenance personnel familiar with all elements of
the machine. Always use common sense when using machinery.
2. Machine description
The Blastrac dust collector 2-48DC is a high performance machine which is exclusively designed and built to be
used in combination with the Blastrac 2-48DS blast cleaning machine. It is equipped with 20 pieces of specially
designed high quality Blastrac cartridge filters. The rotating valves transport all generated debris directly into
BigBags for easy removal. The 2-48DC can
only
be used for
dry cleaning.
It should
only be
used for removing
noncombustible/non-explosive dust or substances
.
The 2-48DC must
not
be used for
pathogenic or carcinogenic or asbestos substances
.
Do not use the machine in the presence of dangerous atmospheres.
The machine is designed for usage in conditions according to classification
M
(see below).
Classification acc. standard EN 60335-2-69
–
Annexe AA
Class
Designation
L
(light hazard) suitable for separating dust with a limit value of
occupational exposure of
greater than 1 mg/m3;
M
(medium hazard) for separating dust with a limit
value of occupational exposure not
less than 0,1 mg/m3
H
(high hazard) for separating all dusts with all limit
values of occupational exposure,
including carcinogenic and pathogenic dusts.
Dust emissions into the environment
Class
Value of performance
L
Retains at least 99 % of Most Penetrating Particle Size (MPPS) 0.3
μm
M
Retains at least 99,9 % of Most Penetrating Particle Size (MPPS) 0.3
μm
H
Retains at least 99,995 % of Most Penetrating Particle Size (MPPS) 0.3
μm
Application
The 2-48DC is especially designed to be used in combination with Blastrac machines.
Contact Blastrac B.V. for the correct execution and combinations.
