Adjusting the fork and the front wheels
Tilt adjustment:
Keeping the axle of the fork perpendicular to the ground
is required.
•
remove the fi xing screw (i) and change the position of
the cam nut (l) inside the fork support
•
once at the correct position, reinsert the cam nut and
tighten fi rmly into the slot
Whenever an adjustment to the rear wheel is required
(see page 11), the front fork inclination must also be adju-
sted.
Front wheel height adjustment:
it is required in order to set the wheelchair at a correct
height
•
remove the screws (m), move the wheel so that it
matches the holes on the fork
•
insert the screws and tighten fi rmly
i
12
Caution:
The wheelchair front height and tilt must be adjusted
whenever the front wheel is replaced with a wheel of dif-
ferent size, when the rear wheel adjustment changes or
simply if you want to change the height of the wheelchair.
Whenever the wheelchair height is modifi ed, the inclina-
tion of the wheelchair must also be modifi ed and verifi ed
accordingly (perpendicular to ground).
l
m
